RIFF Box 2

$240.00

Riff box 2 is the new JTAG tool by the original riff box jtag team. Supporting JTAG / SPi / iSP / i2C connectivity. New 2018 Stock now comes with Free RC2000 Adapter

Compare
Category:

Description

RIFF BOX 2 After six successful years since the first RIFF Box hardware was released, we are introducing a new RIFF Box 2 hardware. Developers did their best to develop a reliable, marvelous, yet functional device. RIFF Box 2 hardware is designed to accommodate a large variety of communication protocols.

RIFF Box 2 – Hardware Specification:

  • Dual-core Cortex-M4 MCU @ 204MHz
  • PC to Box USB (Device) Speed: Hi-Speed (480 Mbps)
  • Box to Device (Host) Speed: Full-Speed (48 Mbps)
  • SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz
  • UART Interface
  • RIFF™ Smart Probing Feature
  • Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.
  • 4 fixed 3.3V GPIO Lines

RIFF Box 2 – Interface Specifications:

  • 20-Pin Male Connector: JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST, SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins)
  • 30-Pin Male Connector: SD/MMC Interface 1/4Bit @ 52MHz, Level-adjustable 23 GPIO Lines (1.65V to 3.6V), USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec
  • USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec
  • RJ-45 Connector: RIFF Smart Probing Feature, UART Port, 4 Fixed 3.3V GPIO Lines

Supported SD/MMD Revisions:

  • Revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher

Supported JTAG Cores:

  • ARM7, ARM920, ARM926, ARM946, ARM7EJS, ARM11, CORTEX-A5, CORTEX-A8, CORTEX-A9, CORTEX-A15, OMAP3430, OMAP3630, OMAP4430, TEGRA2 (CORTEX-A9), TEGRA2 (ARM7), QUALCOMM S3 (ARM7, ARM11, SCORPION), QUALCOMM S4 (ARM7, ARM11, SCORPION), NOVATHOR, PXA270, PXA312, MIPS32 IR5Bit, MIPS32 IR8Bit.

RIFF Box 2 JTAG firmware supports following features at the moment:

  • ARM7/ARM9/ARM11 PXA3xx, PXA270, Cortex-A8, OMAP850, Cortex-A9 , Cortex-A15, Cortex-A5 Dual/Quad cores support
  • Multiple devices on JTAG chain are supported, thus TAP number selection is available
  • Any custom voltage level selection from range ~1.4V to 3.3V
  • TCK/Adaptive clocking selection
  • Halt core (NRST is not changed)
  • Reset core (NRST is applied before halt)
  • Direct Read memory (by 8/16/32-bit bytes/half-words/words)
  • Direct Write memory (by 8/16/32-bit bytes/half-words/words)
  • Access to the control registers of ARM core (coprocessor 15)
  • Program code breakpoints
  • Run core
  • Custom scripting and DCC loader support (trace32 compatible)
  • Custom GDB Server Available
  • I/O pins detection !Unique feature offered only by RIFF JTAG
  • i2C Connectivitysupported
  • iSP Connectivity supported
  • SPi Connectivity supported
  • eMMC Connectivity supported

Reviews

There are no reviews yet.

Be the first to review “RIFF Box 2”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.